Categories
Careers-in-Art

How to fix bent glasses

It happens to the best of us. You put your glasses down for just a minute and … crunch. Whether you sit on them, step on them, or your kids got ahold of them, glasses get damaged for a whole slew of reasons. Don’t fret! And don’t order brand-new glasses just yet, either. If you love your specs, chances are there’s a solution to fixing them. Get ready to learn how to fix bent glasses.

Bent glasses can be unbent. It may just take some time, patience, and a little TLC. Glasses are an investment and we don’t want to see yours thrown in the garbage. Although a professional repair is always best, it may be more trouble and money than it’s worth. If you’re going full-DIY, here are our top tips on how to straighten and fix those bent glasses.

Figure Out What Needs Fixing

The first thing to determine is where the kink in your glasses is. Sometimes it’s obvious. Other times you’ll know they’re bent because they do not fit on your face right, but you can’t tell exactly where the problem is.

There’s an easy solution for this. Place your glasses on a table or other flat surface and see which side is up in the air. Take note, because this is the side that needs to be fixed.

Easy Does It

Before you set out to figure out how to fix bent glasses, make sure you know what kind of problem you’re dealing with. Depending on the type of glasses you bought, and if they’re prescription, they may have cost you a pretty penny. Keep that in mind when you’re ready to straighten your frames. If you try to force them back into shape, you may just end up snapping them accidentally. Here are some things to keep in mind:

  • Be gentle and don’t use excessive force.
  • Don’t apply too much pressure.
  • Avoid quick, jerky movements.

Most of the pressure you apply only needs to be concentrated on the nosepiece. If that doesn’t work, there are different methods you can try depending on whether you have metal or plastic frames.

How to Fix Bent Glasses with Metal Frames

To fix metal frames, there are two things you’ll need: soft, plastic-tipped pliers and a thin piece of cloth. Then, try these steps:

  1. Place a thin cloth over the glasses to prevent them from getting damaged. This could be a hankie or a cloth napkin.
  2. Make sure the cloth is unwrinkled so you can see how the glasses bend underneath it.
  3. Position the pliers over the bent section of the frames.
  4. Hold them secure but not too hard as you adjust the glasses.
  5. Try them on to see if they fit properly. If not, continue to straighten as needed.

How to Straighten Plastic Frames

When eyewear retailers adjust plastic frames, they usually use a box filled with warm sand. This heats the plastic and makes it pliable without melting it. If you have sand you can use, that’s perfect. But most people don’t, so we have to use a different method. To fix your plastic glasses, all you need is warm water or steam. Then follow these steps:

  1. Fill a shallow bowl with warm water, ensuring that the temperature is not too hot. If it’s too hot to touch, it’s too hot for your plastic frames.
  2. Place your glasses in this bowl of warm water, hold them under a stream of hot water, or use steam. They need to be exposed to the warmth for between 30 seconds and a minute.
  3. Once sufficiently heated, the glasses will be especially fragile.
  4. Hold the glasses steady as your thumbs make minor adjustments. Apply pressure a little bit at a time.
  5. After you try them on, if they still need some work, warm the plastic and try again.

Stock Up on Stylish Glasses

Sometime’s it’s not enough to know how to fix bent glasses. If your glasses can’t be fixed, we know you may be bummed — but there’s another simple solution. EyeBuyDirect sells stylish frames for every look at prices that can’t be beat. Plus, we offer a 14-day Fit & Style Guarantee for those who’re a little squeamish about buying online. Every one of our chic glasses comes with a 12-month Product Guarantee.

Don’t let bent glasses keep you from superior style. Browse our extensive glasses catalog and stock up on frames you’ll love.

How to fix bent glasses

The frames of eye glasses often get bent out of shape, either because someone sits or steps on them mistakenly, or due to any other accident that might occur. Reshaping the bent frames, whether they be metal and plastic, is not a difficult task, as long as do it carefully so that you do not end up snapping the frame in half. The most important thing to take into account when repairing a bent frame is to remember that you need to apply as little pressure as possible.

Things Required:

– Small precision screwdriver
– Cotton balls or cloth
– A pair of Needle-nose pliers
– A soft linen cloth

Others are Reading

Instructions

Know exactly where the frame needs to be fixed

Observe your frame carefully, in order to figure out exactly where it needs to be fixed. To check the damaged points, lay your glasses flat on a straight surface upside down, with the lens frame touching the surface while the temples point up. Check where the frame is unusually pointing upward and locate the starting point.

Remove the lens

Using a small precision screwdriver, remove the screws holding the eye wire or rim and the side legs together. Then, remove both the lenses of the glasses. If your frame does not have screws, use the expansion method to remove the lenses. Heat the eye wire (the front frame), holding the lenses for five minutes with your blower set on high speed. The heat will expand the plastic or metal frame, allowing you to remove the lenses easily. Wrap the lenses in a soft cloth and put them aside in a safe place.

Repair the frame using soft pliers

Use a pair of soft pliers to fix the bent metal frames. Wrap a cotton ball or cloth around the bent area, as this will keep the pliers from scratching or damaging the surface. Put the pliers in the centre and apply a little pressure to bend the frame back into place. If the frame is still bent, try applying the pressure in the opposite direction as well.

Reshaping plastic frames

Fixing plastic frames with pliers can break them, so it is better to heat the frame before reshaping the bend back into place. Soak the frame in hot water for a couple of minutes, or apply hot steam to the affected area to make it pliable, and then bend it back into the correct shape. However, avoid overheating, as it may melt or further deform the frame. Once done, pat the frame dry with a soft linen cloth.

How to fix bent glasses

We have all tried it. You put your glasses down for just a minute and … crunch. Whether you sit on them, step on them, or drop them from your pocket, glasses can get damaged for various reasons. You shouldn’t just let them go, however – if you love your frames, chances are there’s a solution to fixing them. Get ready to learn how to fix bent glasses.

How to fix bent glasses

Cloos x Brady in ‘Ristretto’

Identify the problem

The first thing to determine is where the kink in your glasses is. Often, you can tell your frames are bent because they do not fit on your face right, but you can’t identify exactly where the problem is.

Luckily, this is easy to determine. Place your glasses on a table or another flat surface and see which side is up in the air. Take note, because this is the side that needs to be fixed.

Before you begin

When setting out to fix your bent glasses, make sure that you are not in a rush and have the time to be patient. If you try to force them back into shape, you may just end up making more damage than good. Thus, here are some things to keep in mind while working on your glasses

  • Be gentle and don’t use excessive force.
  • Don’t apply too much pressure.
  • Avoid quick, uncontrolled movements.

How to Fix Bent Acetate Frames

It is crucial to understand which fixing method is the right one to use depending on which material your glasses are made of. With acetate frames, all you need to correct them is warm water or steam. As the acetate gets heated, it is made pliable, allowing you to gently bend the frames into place. Here are the exact steps to follow:

  1. Fill a bowl with warm water, making sure that the temperature is not too hot. If it’s too hot to touch, it’s too hot for your acetate glasses.
  2. Either place your glasses in this bowl of warm water, or hold them under a stream of hot water. They need to be exposed to the warmth for between 30 seconds and a minute.
  3. Once sufficiently heated, the glasses will be especially fragile.
  4. Hold the glasses steady as your thumbs make minor adjustments. Apply pressure a little bit at a time.
  5. Try them on or put them on a flat surface to assess the effect. If they still need some work, repeat the process one more time.

How to Fix Bent Metal Frames

To fix glasses with metal frames (e.g. our Gouverneur or St. Barths) there are two things you’ll need: soft, plastic-tipped pliers and a thin piece of cloth. Then, try these steps:

  1. Place a thin cloth over the glasses to prevent them from getting damaged. This could be a hankie or a cloth napkin.
  2. Make sure the cloth is unwrinkled so you can see how the glasses bend underneath it.
  3. Position the pliers over the bent section of the frames.
  4. Hold them secure but not too hard as you adjust the glasses.
  5. Try them on to see if they fit properly. If not, continue to straighten as needed.

Stock Up on Timeless Frames

Sometimes, the damage done to your glasses may be so serious that you can’t fix them yourself. If you don’t want spend a lot of money getting them fixed professionally, there’s another simple solution. At Christopher Cloos, we offer timeless and elegant frames in premium quality at affordable prices. And even though all glasses can get bent, each frame across the Cloos Collection is made from particularly robust materials, as well as being equipped with spring hinges to ensure a perfect fit for every face shape.

Don’t let bent glasses keep you from superior style. Browse the Cloos Collection and stock up on frames you’ll love.

fixmyglasses will replace your nose pads, temple tips and any missing or stripped screws on your glasses with new ones. Our master eye wear technicians are experts of eyeglass and sunglass frame overhauls.

How to fix bent glasses

fixmyglasses will replace your nose pads, temple tips and any missing or stripped screws on your glasses with new ones. Our master eye wear technicians are experts of eyeglass and sunglass frame overhauls.

How to fix bent glasses

About adjustments and overhauls

Adjustments and overhauls on eyeglasses and sunglasses can vary from the common minor eyewear adjustment to the complete overhaul and refurbishing of the respective eyeglasses or sunglasses. Regardless of the degree of attention needed, our technicians have a state of the art lab and over eighty years of experience to handle any job.

MINOR EYEGLASS AND SUNGLASS ADJUSTMENTS:

Minor eyewear adjustments usually require very few minor parts (nose pads, temple tips, etc.), if any. Some of the most common minor eyeglass or sunglass adjustments vary from adjusting crooked eyewear frames to simply replacing old, used or even missing standard nose pads and/or temple tips.

EYEWEAR OVERHAULS AND RESTORATIONS:

Our technicians also have the expertise of complete eyeglass or sunglass overhauls and restorations. fixmyglasses has access to original parts (when available) and our lab also stocks thousands of original and generic eyewear parts too.

FREE SHIPPING BOTH WAYS WITH NO COMMITMENT

Click here to fix

3 Easy Steps To Fixing Your Glasses

Send your broken glasses to us with our free postage label

We confirm the options and cost with you and carry out the repairs

We return your glasses back to you usually within 24 to 48 hours of your confimation, good as new

Other Services Offered by fixmyglasses

How to fix bent glasses

Plastic Glasses Adjustment

Plastic eyeglass and sunglass frames can be Overhauled and be reformed. The Experts at fixmyglasses have the tools to reform you glasses to original their shape.

How to fix bent glasses

Repair Metal Glasses Frames

fixmyglasses uses laser technology producing practically unnoticeable results on eyeglass and sunglass frame repairs. Our eyewear repairs include free shipping and are backed with a one year warranty.

How to fix bent glasses

Fixing Plastic Glasses

fixmyglasses can fuse eyeglass and sunglass elbows on almost any plastic eyewear frame. Our master eyewear repair technicians will leave your broken plastic eyeglasses and sunglasses looking like new!

“They are great, I sent my Ray Bans to get fixed They came back in a week, versus 2 months Luxottica repairs took, last time I used them.”

“Thank you for fixing the sunglasses I sent in such a timely manner. I appreciate you getting them back by Father’s Day. They look really great and my husband was surprised.”

“This site was absolutely fantastic. I sent my sunglasses to them to be repaired. They were very fast, accommodating, and the sunglasses look brand new. I was very impressed by this business.”

“The order showed up today thanks for the very prompt service. I wasn’t expecting a no-charge repair your company is a pleasure to do business with and I brag about you guys to all my friends. Hope you win a JD Powers Award of excellence someday! You have a first rate operation!”

“Thanks so much for the repair of my sunglasses. It was so exciting to have them repaired after so many years.(20?) I just didn’t think they could be fixed, but I could not bear to throw them away, they were a gift. It might not seem like such a big deal, but to me, it was! Thanks again.”

About Us

fixmyglasses uses the latest technology to efficiently process every eyewear order from beginning to end. With over ninety years of combined experience fixing eyeglasses and sunglasses, our master eyewear repair technicians and opticians have a solution for all eyewear issues. By combining experience with technology along with a one year warranty on our eyewear repairs and devoted customer service, fixmyglasses has created an unparalleled experience when it comes to online eyewear repair service.

We put our glasses and sunglasses through a lot and accidents can happen with them, but don't worry, we're going to show you how you can repair your glasses and sunglasses. The following descriptions can show you how to fix broken glasses arm problems or ill-fitting frames, and may guide you in the continued use of your favourite glasses or sunglasses.

When a screw falls out

The front face of your glasses is connected to the temples by tiny screws and hinges. Every once in a while, these screws get loose or even fall out. When this happens, all you need is a tiny screwdriver to screw them back in place. Just line up the hinges and insert the screw into the holes and screw it back in.

If you can't find the missing screw, take a screw from an older pair of glasses that you don't wear any more, or visit the store where you purchased the frames.

Repair kits for glasses

Repair kits for glasses are a smart investment. They contain extra screws, a small screwdriver, a cloth, a magnifying glass and a storage case.

Temporary fixes for glasses frame repair

If you can't find a screw at all, you can also use tiny wire from a twist tie. Just strip the paper off from the wire. Another option is to use a paperclip. Line up the holes and thread the wire through them with the glasses in the open position.

Twist the wire in place until the arm feels secure. Cut off the remaining tips of the wire, so you don't get scratched, and keep the temples (arms) in the open position.

You can also use a toothpick for a quick and temporary fix. Just line up the holes, push the toothpick through, and trim and tuck the excess.

Ill-fitting frames

Glasses that become too tight or too loose can also be adjusted. Metal and plastic frames can be reshaped when gently heated, as the heat will soften the material and allow you to bend the temples back into their original shape.

When adjusting the frame, make sure the frame does not have any oxidation. If the temples of your glasses have white spots or marks, chances are the material has hardened. If you try and adjust the frame when it’s oxidised, the temples might break, even after heating them.

Pour hot water into a bowl and place your glasses (ideally only the temples) in the water for a minute or two. Be careful: if the water is too hot to touch, chances are it's too hot for your glasses. Water warmer than lukewarm can affect the coating of your lenses. Remove the frames from the water and bend the temples gently.

Bending the temples inward makes them tighter and bending them outward makes them looser. Place them back in the water to reheat if the frame cools and stiffens. Try not to force the temples, otherwise they may break.

Scratches

Unfortunately, there are no products to remove scratches. Polishing the lenses enough to remove a scratch will also change the prescription of the lens, which can result in blurred vision, eye fatigue or eye strain. To prevent scratches in future you can add an extra scratch-resistant coating to your lenses. When you next buy new glasses or replace your lenses it may be worth considering.

How to fix bent glasses

If your frames aren't fitting correctly, it might be easier to adjust your glasses at home than you think. You can fix most common frame problems yourself, but sometimes taking your glasses to an optician is the best course of action.

Of course, if your problem is with your lenses, that’s something you can't usually repair at home.

Here are four common eyeglass frame problems and how to fix them:

Problem #1: Your glasses are crooked

If one side of your frames looks higher than the other, you need to adjust the arms of your glasses — the part of the frames that hooks behind your ear.

If the right side is higher than the left: Gently bend the left arm down at the hinge or where the arm bends behind your ear. 

If the left side is higher than the right: Gently bend the right arm down at the hinge or where the arm bends behind your ear. 

HELPFUL TIPS: 

Adjust frames a little bit at a time to avoid overcompensating and possibly damaging your glasses.

Run the arms under warm water to make them easier to adjust. Only use water as warm as you can get from the tap. Do NOT use boiling water!

Avoid running warm water over the lenses, since it can affect the lens coatings.

Problem #2: Your glasses pinch your nose

Glasses that pinch your nose aren't just uncomfortable, prolonged pressure can cause headaches or migraines too. How you fix this depends on your frame material.

If you wear metal frames: Simply widen the plastic nose pads using your thumbs until the frames fit comfortably.

If you wear plastic frames: Once you’ve soaked the arms of your glasses in warm water for 30-60 seconds, gently apply an upward and outward pressure on the end of the arms to get a more relaxed fit.

HELPFUL TIP: If your glasses still pinch your nose after adjustments, ask a professional optician for help.

Problem #3: Your glasses slide down your nose

Frequently pushing up your glasses because they’ve slid down your nose is annoying, but tightening your glasses is easy.

If you have metal frames: Use your thumbs to narrow the nose pads until the frames no longer slip. 

If you have plastic frames: Soak the arms of your glasses for 30-60 seconds in warm water, then apply a gentle downward and inward pressure on the end of the arms. This gives a better fit behind the ear, which should tighten the overall fit and prevent slipping.

HELPFUL TIP: Summertime is prime time for glasses and sunglasses sliding down your nose. If tightening the frames doesn't do the job, try using glasses wax to stop the slippage.

Problem #4: Your glasses are too loose or too tight on your temples

Your glasses will feel very uncomfortable if your frames are too tight on your temples. On the other hand, if your frames are too loose, it can look and feel a little awkward.

Either way, you can adjust your frames at home for a more comfortable fit:

If the arms squeeze against your temples: For metal frames, use your nondominant hand to secure the lens of your glasses. With your dominant hand, apply very gentle outward pressure on the corner part of the frames located between the arm hinge and the lens. Repeat on the other side of your frames for a looser fit around your temples. 

If the arms fit too loosely at your temples: Again, only for metal frames, use the same method used to loosen arms, except apply gentle inward pressure on the corner part of the frames located between the arm hinge and the lens. Repeat on the other side to tighten the fit around your temples.

HELPFUL TIP: Adjusting the temples of rimless, semi-rimless or plastic frames could break them. It’s recommended that you take these types of frames to an optician for adjustment.

When to take your glasses to a professional

It's better to have your glasses fixed by a professional if your frames are made of certain materials that resist adjustment. These materials include frames made of aluminum alloy, titanium or memory titanium, and memory plastic.

Certain styles of glasses or sunglasses are also best handled by an optician. For example, more durable frames, like those found in rimless or semi-rimless styles, can be more fragile when it comes to making adjustments.

If you receive your new glasses and they aren’t a perfect fit or if you have existing glasses and find that they aren’t quite fitting how they used to or are in need of some repairs, we have a few tips on what you can do at home.

Our full adjustment and dispensing services will be available when stores re-open fully. For any urgent assistance in the meantime, please call your local store

My new glasses have arrived, how do I fit them?

Adjusting to new glasses, whether you’ve switched to a new prescription or are wearing them for the first time, can be a challenge for some people. If you’ve never worn glasses before, simply having frames on your face may seem strange and take some time to get used to. On top of this, some people may suffer from problems such as headaches, dizziness, or their eyes may water.

For most people, they will get used to the new sensation within a matter of days. Fortunately, plenty of people have been through the same experience and there are several tips you can try to adjust to wearing glasses more quickly. First of all, start by putting on your glasses as soon as you start your day. This will help you to form a habit of wearing them early on, and if you put them on later on in the day you may find the sudden change more disorientating.

Itchy eyes, redness, soreness or blurred vision can occur, in which case you should remove the glasses until the symptoms pass and try again. Adjusting may also depend on the glasses themselves. If you are wearing graduated lenses or bi- or tri-focals, you may want to try to turn your head instead of only moving your eyes. This will take a conscious effort but you will soon get used to the movement, which will make the transition easier.If after a period of two to three weeks you are still not happy with the fit of the frames on your face, or are still struggling with headaches, dizziness or watery eyes, then you should consult your optometrist. They will be able to double check the fitting of your frames and ensure your prescription is correct, as there may be an issue causing your discomfort.

How do I stop my glasses from slipping?

With a little heat you can tighten up your glasses, so they fit more securely on your head.

  1. Place your glasses down on the table and cover with a lens cloth
  2. Heat the arms with a hair dryer or warm water for 5 seconds
  3. Hold the frame and bend the arm inwards, but be careful: don’t apply too much pressure otherwise the arm will snap
  4. Cool the arm in water once you’re finished adjusting
  5. Try the glasses on and repeat the above steps if they’re still too loose

How do I fix my glasses with a twisted bridge?

With a little heat you can straighten up the bridge on plastic glasses.

  1. Place your glasses down on the table and cover with a lens cloth
  2. Heat the bridge with a hair dryer or warm water for 5 seconds
  3. Hold the front of the frame and twist, but be careful: don’t apply too much pressure otherwise the bridge will snap
  4. Cool the bridge in water once you’re finished adjusting
  5. Try the glasses on and repeat the above steps if the bridge is still twisted

How do I adjust nose pads on my glasses that don’t sit properly

You can adjust the angle of the nose pads on your glasses.

  1. Put your glasses on and check if the nose pads are sitting flat against your nose
  2. If not, grip the nose pad and angle it gently so that it sits flat
  3. Test your glasses to make sure they fit comfortably
  4. Repeat the above steps if necessary
  5. Clean your lenses

How do I replace the nose pads on my glasses?

If spare pair not available, contact your local store

  1. Take your glasses off and inspect the nose pad arm
  2. Take off the old nose pads
  3. Attach the new nose pad to the nose pad arm
  4. Adjust the nose pad to fit firmly and flat on your nose
  5. Test your glasses and repeat the above steps if necessary

How do I tighten my loose frames?

You can tighten the screws on the arms of your glasses if you find they’re feeling loose.

  1. Find a precision screwdriver, which you can order online from a hardware store if you if you don’t already have one
  2. Place a cloth over the lens and find the loose screw
  3. Rest the frames on a bench for support
  4. Position the screwdriver vertically above the screw and tighten until resistance is firm
  5. Clean your lenses

My glasses are bent, how do I straighten them?

With a little manual adjustment, you can straighten a bent frame.

  1. View the frame from the side
  2. Identify which side needs adjusting
  3. Apply gentle force and don’t try to adjust it all in one go
  4. Place the glasses upside on a flat surface and make sure they lie flat
  5. Try on your adjusted glasses

How to fix bent glasses

When you rely on your eyeglasses to see clearly, bending or breaking them feels like a total disaster. You don’t need to pay for a new pair, though. Most glasses frames are made of either metal or thick plastic. If yours are metal, then you’re in luck. With a bit of heat, metal becomes very pliable, so it’s a cinch to bend frames back into their original shape.

Step 1

Fill a bowl with hot water that’s comfortable enough to touch.

Step 2

Soak your glasses in the hot water for about two minutes. This softens the metal slightly, making it easier to bend. Remove the glasses from the bowl and shake off any excess water.

Step 3

Wrap a thin cloth around the bent part of the frame. This protects the frame from scratches.

Step 4

Hold the glasses in one hand and a pair of plastic-tipped pliers in the other hand.

Step 5

Grasp the bent part of the frame between the tips of the pliers. Gently bend the frame in the desired direction. If the metal won’t bend, don’t force it — this can cause the frame to snap. Soak the glasses in hot water for a few more minutes, then try again.

Step 6

Lift the cloth and check the frame. If it’s still not fixed, recover the frame with the cloth and bend it a bit more until it’s as straight as you’d like.

Glasses repair is always cheaper than buying a whole new item. Your eyeglasses can be loose, bent, or out of alignment with daily wear and tear. Sometimes, minor damage can make you uncomfortable wearing your favorite eyeglasses. Even, it can affect your eyesight negatively. If you wear branded eyeglasses like Ray-Ban, they are very expensive. Unfortunately, if they get broken, you must try to get them repaired instead of buying a new piece.

At Eyeglass Repair USA we can repair almost any break or damage to the metal parts of your cherished eyeglass frames. A bent or broken hinge, a cracked frame or arm, a lost nose pad or hinge pin – in most cases all of these problems and more can be fixed fast. Even titanium eyeglasses snapped in two across the bridge can be repaired, as good as new.

Using precision laser welding and with a stock of spare parts, we can fix your glasses so delicately that the repair will be invisible to the naked eye. So whether you have damaged or broken your expensive designer frames, your vintage heirloom glasses, or just your much loved old favorites, we can fix them fast, precisely, and durably right here at our workshop here in the USA.

We are serving since 2002

We are in the eyeglasses repair business since 2002 and have repaired thousands of eyeglasses of almost all brands nationwide. With our easy 3 step process, you can easily get your broken eyeglasses or sunglasses repaired online. We are proud to deliver satisfactory services to our clients.

All you have to do is to select your frame type (plastic, metal, etc.), select the location for the repair of your damaged part, and then click through to order your repair. You then mail the eyeglasses to us, and we take care of the rest – restoring your frames and returning them to you.