Categories
Medicines-and-Drugs

How to fix nail clippers

In this article, we are going to discuss how to fix nail clippers. It isn’t an uncommon occurrence to come back from a shopping spree to find your brand new nail clipper lying broken in your bag. Nail clippers are usually tiny and require delicate handling. They break easily. Now, this can be frustrating to work with- but it isn’t all bad news! Keep reading if you want to find out how to fix nail clippers.

How to fix nail clippers

Luckily for you, nail clippers are very easy to fix as long as you have all the parts. All you need to do is reattach the handle. The other parts will find their rightful places.

Often times, we may take apart our nail clippers to sharpen the blades or manually clean different parts. If you’re doing this with no knowledge of how to piece your clipper back, you’re at the right place!

This guide will tell you exactly how to fix nail clippers. By following these steps, you can transform a broken clipper into a perfect, brand-new version of itself.

How To Fix Nail Clippers?

Locate the pin. A pin refers to a circular and rod-like structure that clumps the handle with the rest of the nail clipper. The handle is a lever that you push down to enable the click action to cut your nails.

Next, find the top and bottom holes running through the blades of your clipper. You will have to launch your pin into the bottom hole and bring it out from the top. The notch of the pin should be facing upwards, i.e, it must appear through the top hole.

To distinguish the top hole from the bottom one, look for the pick or the nail file. The surface on which the pick or the file is present is the top side of the clipper. If the clipper is lacking a nail file altogether, both sides can be used interchangeably.

How to fix nail clippers

Your next step is to squeeze the clipper blades in between your fingers (use your thumb and your forefinger) simultaneously while holding onto the pin. This is to make sure that the pin does not escape from the whole, in which case you will have to begin the process all over again. Clipper blades are usually tough to handle. If you can’t bring them closer no matter how hard you squeeze, you can use a vice instead.

For easier access in the following step, make sure that the notch on your pin (notch refers to the spot below the curved edge) is facing away from the nail clipper.

It’s time to bring the long-awaited handle into play. Your handle will have an opening on one end. Attach the handle to the pin by inserting it into the notch through the opening end.

You can now release the pin and the clipper blades from pressure. Due to tension created in between the blades by holding them down, the handle will now be screwed firmly into the pin.

Revolve the handle back into its original position to continue trimming nails as usual. Test the strength of its grip by turning it over. To clip nails, you will have to flip the handle upside down parallel to the nail file.

You’ve learnt how to fix nail clippers .

By now, you will have successfully returned a “broken” nail clipper into its original, working form. Why blow money on a brand new nail clipper, when there is a possibility of bringing your old one back to full-fledged use!

Method: Rinse the metal item and shake dry. Dust with baking soda (it will stick to the damp areas), making sure to cover all rusty areas. Leave the item for an hour or so, then scour with steel wool or a metal brush, removing the rust down to the metal.

Do nail clippers need to be replaced?

The blades of low-quality nail clippers can become dull and jagged after as few as three or four uses. But a high-quality nail clipper never needs to be replaced and can be a pleasure to use.

What are the parts of a nail clipper?

A Nail Cutter is a hygienic-hand tool that is used for trimming fingernails as well as toenails. It consists of four main parts; the lever, the pin, the file, and the blades. The lever is connected to the base by the same bolt that connects the two main pieces of the base.

How do you remove rust from Clippers?

Remove light layers of rust by scrubbing the affected areas with steel wool. Remove significant amounts of rust by soaking your hedge clippers in white vinegar for 10 minutes. Then scrub them with a stiff wire brush. Every time you remove rust from your hedge clippers, you are removing layers of metal.

Can nail clippers rust?

Bad News: Once the chromium has become compromised and rust (corrosion of the iron due to oxygen) has formed, the damage is one-way and the piece cannot be refurbished. You can remove the rust to improve the appearance of your clippers; but, the rust will eventually return.

Is it bad to cut your nails with nail clippers?

Cutting fingernails with nail clippers Fingernail clippers have a curved edge designed to make it easier to trim your nails. They work well, but if dull, they can damage your nails, crushing them each time you cut.

How do you sharpen nippers at home?

If you’ve wondered how to sharpen cuticle nippers with sandpaper or whetstones, the process is the same for both tools. You will need to press the blade at about a 30–45º angle considering the sharpening tool and move the edge 5 to 10 times always forward across the surface.

Do nail clippers go blunt?

Nail clippers, just like knives have an edge. All edges will dull over time and the rate at which this happens will depend on how frequently it is used. Sandpaper is an awesome abrasive that has many applications as far as sharpening is concerned.

Should toenail clippers be straight or curved?

A straight trim will help ensure your toenails grow forward as they should. Curved edges provide more opportunity for your nails to grow into your skin instead. If you are concerned about the corners of your nails poking against you or catching on your socks, gently file them down instead of clipping them off.

Can hydrogen peroxide clean nail clippers?

Sterilize nail clippers. Soak in 70% or 90% rubbing alcohol for 20 minutes. Use a Q-tip and throw away after each use. Soak toes in 1:1 vinegar and hydrogen peroxide daily for 10 minutes for 3 weeks.

What is that sharp thing on nail clippers for?

The nail clipper has two main parts that are bolted together and provide the necessary leverage to trim the nail. At the ends of these two pieces is the sharp part of the nail clipper that is used to cut the nail. These ends are shaped to fit around your fingernail or toenail. Leverage Part.

What is the hook on nail clippers for?

The double-sided nail file has two grades of roughness for your convenience. The little nail cleaner hook at the end allows you to quickly get out all of the dirt from underneath your nails.

What is the difference between fingernail clippers and toenail clippers?

Other than the obvious, the difference between these two sets is that toenail clippers are larger and are more adapted to handling the bigger and tougher nails found on a person’s toes. It’s important to try to avoid using fingernail clippers as toenail clippers because that could end up ruining them.

Can I use rubbing alcohol to clean my clippers?

The best way to clean barber clippers is with a professional clipper spray. Take a small cup of isopropyl alcohol and carefully pour it over the teeth, ensuring that it doesn’t enter the electrical compartment of the clipper. Wipe them dry with a soft towel before using them.

How do you keep clipper blades from rusting?

Five Quick & Easy Tips for Preventing Rust on Shears & Clipper A Few Drops of Oil A Day. Be sure to clean all blades and shears at the end of each day. Keep Styptic Powder Away. Give Them a Short-Term Soaking. Let Them Breathe. Wrap Them Up.

How often should Clippers be cleaned?

Make sure your clipper is properly cleaned every day. Remove all the hair from the blades and the blade drive. You can either do this with the supplied brush or a toothbrush.

What can I use instead of Clipper oil?

⦁ Mineral Oil – Well, for starters, mineral oil is actually a liquid form of petroleum, and it’s frequently used as a cheap alternative to hair clipper oil.

Does vinegar remove rust?

You can use white vinegar for effective rust removal. The rust reacts with the vinegar and later dissolves. Simply soak the rusty metal object in white vinegar for a couple of hours and then just wipe to remove the rust. Alternatively, you can also use a cloth soaked with white vinegar to wipe the object.

How do you get rust off a nail cutter?

How to Remove Rust With Vinegar Cover Object in Vinegar. Submerge the rusted object in undiluted white vinegar. Soak the Object. Allow the object to soak in the vinegar for at least 30 minutes. Scrub Surface Rust. Rinse and Dry.

Can nail clippers cause infection?

They can spread from person to person. You can get a fungal nail infection from walking barefoot in public showers or pools or by sharing personal items, such as towels and nail clippers.

How do you disinfect nail clippers without alcohol?

Disinfecting your tools* If you do not have Isopropyl Alcohol, you can boil your metal tools in water for 20 minutes. Be sure to wash your hands before picking up the disinfected tools. When soaking is complete, allow them to dry on a clean paper towel.

How to fix nail clippers

You know what really grinds my gears? When I go to clip my nail and the nail clipper is so dull that it won’t even cut through my nail. It’s even worse when the clipper is dull and you end up tearing away your nail and inevitably ending up with a hangnail! When this scenario happens you have two choices;

(A) Go out and buy another set of nail clippers

(B) Take a couple of minutes to sharpen the clippers

I bet you can pick which option I’ll choose, so get out some stones and start sharpening! Luckily, sharpening nail clippers is by far one of the easiest and non-labor intensive sharpening activities you can take on. The stones/abrasives I use to sharpen nail clipper can include:

  • A Diamond Tapered Rod or Blademedic
  • Ceramic Rod or Blademedic

The first step in sharpening nail clippers is to take them apart. Squeeze the clippers together to remove the lever and the pin that holds the lever to the clippers. Make sure to keep the loose pieces in a secure place where you won’t lose them.

Nail clippers generally have two chisel ground blades that meet to clip your nail. Chisel grinds are usually very easy to sharpen since there is only one bevel to worry about shaping and a flat side. The difficulty you come across with sharpening nail clippers is that they often have concave edge geometry. This is why having various round abrasives will be useful when sharpening various nail clippers with different edge geometry.

How to fix nail clippers

Severely damaged edges

First off, determine the best tool for the job. This pair of clippers has pronounced concave edge geometry, so I’ll start with Lansky Tapered Rod or the Blademedic Sharpener.

Lay the very tip of the Tapered Rod flat against the bevel on one side of the clippers. In this case I’m bringing the sharpener to the bevel so I will be pulling the sharpener against the edge rather than pushing the edge against the sharpener. Now I’ll work from the top of the edge to the bottom of the edge using standard sharpening techniques. Continue this until you’ve removed all damage and see the bevel becoming consistently “shiny” with new metal.

How to fix nail clippers

Once all the damage is removed, pick up your ceramic rod (I like using the half round ceramic on the Blademedic) and just polish up the rough bevel a little bit.

How to fix nail clippers

Once the bevel is sharp and polished, you still have one more step. Pick up your Diamond Tapered Rod and slide it between the teeth of the clippers. Line up the flat side of the edge underneath the bevel you just sharpened. The flat edge should lie flat on the tapered rod. Now work back and forth on the tapered rod to polish the burr formed on the flat side of the edge.

How to fix nail clippers

You have now sharpened one side on a pair of nail clippers! Repeat this process on the other side of the clippers and enjoy a better experience anytime you clip your nails.

How to clip your pet's nails

Did you know that your pet likes to be groomed, just like you? When a pet’s nails get too long they press into the ground and hurt the paw. This can also result in your pet sliding around and falling. When you start to hear tap, tap, tap on the ground when you’re pet’s running by, it’s already past nail clipping time.

Just like people and cars, pets require preventative maintenance. By focusing on problems before they exist, you’ll save you and your pet heartache and physical pain. Last month we described the proper way to brush and comb your pet, today we’re here to help you clip their nails.

What you need:
1 Resco Nail Clipper (Guillotine or Scissor)
Styptic Powder (optional)
Treats

The first step in clipping your pet’s nails is making sure they’re calm and secure. Hold your pet, or have someone else hold them securely, but calmly. Also, make sure they can’t move their paws around too much. If your pet gets fussy, feed them a treat and continue the process.

Next, hold the paw in your hand and snip the tip of the nail off. If your pet has clear nails, you should be able to see the location of the quick inside. If the nail is black you won’t be able to see the quick. Just snip the very tip of the nail. The quick is the inner part of the nail, if clipped it will bleed. Don’t be afraid if it does, take some styptic powder and apply it to the wound. This will clot up almost immediately.

Continue through every nail and don’t forget the Dewclaw (this is the nail on the side of the paw.) Once these are all clipped you’re done, great job! Make sure you give your pet a treat and a nice scratch. Don’t forget to enjoy a treat yourself, you’ve earned it! For more tips and tricks please follow us on Facebook, Twitter, and Instagram!

How to comb your pet

Let’s talk about the importance of grooming your pet. Do you comb and brush your pet once a week? If you didn’t answer “yes,” then please keep reading! Now, why do we need to brush our pets? Pets, just like humans, love to be clean! The easiest way to keep your pet clean is to routinely brush and comb them at least once a week. Getting out tangles before they turn into large mats is a great way to prevent an otherwise painful experience.

You may ask, how do I comb or brush my pet correctly? There are plenty of different types of combs and brushes for each coat type, but don’t overwhelm yourself. First, you’ll want to pick up a combination comb and a combination brush.

When brushing your dog it’s important to make sure you are going with the coat rather than against it. Use your wrist to make swift motions through the coat and out to remove any loose fur. The reason for doing this is you’re breaking up any tangled or matted fur to prevent your pet from feeling any pain.

With the comb, you want to make the same strides. Use the coarse side first to break up any mats or tangles, then flip it to use the fine side to comb the loose hair out. Again, this should be done at least once a week. Not only will that make the process much easier every time you do it, but it will make it a less stressful process for your pet.

Make sure you bring lots of treats and use positive reinforcement. Pet grooming should be a bonding experience for owner and pet. For tips on using more of our grooming tools be sure to follow us on Facebook, Twitter, and Instagram.

How to fix nail clippers

Get full access to Outside Learn, our online education hub featuring in-depth fitness, nutrition, and adventure courses and more than 2,000 instructional videos when you >”,”name”:”in-content-cta”,”type”:”link”>>’>sign up for Outside+.

At the end of a very long first day of a hut trip in the Sierras in 2013, my friend Saylor grimaced as I stripped the bloody socks from my feet. I hadn’t cut my toenails in weeks, and over the course of touring on skis for 20 miles with them shoved into my ski boots, they’d cut deep enough on four of my toes that I bled completely though my socks. It was my own fault, for I’d ignored the cardinal rule of self-propelled backcountry travel: take care of your feet. I tried to not draw attention to myself as I began slowly sawing at my nails with the knife in my multitool when another buddy, Tim, offered me his nail clippers. “You hiked a pair of nail clippers all this way?” I asked, incredulous. “You have to take care of your feet, Joe,” he said with a smile.

Up until then, I’d viewed nail clippers as more of a luxury, something you may use before a long trip but not worth adding to your pack on weight-conscious treks. Now I’m a believer. After that trip, I moved a pair of nondescript Revlon clippers from the drawer in my bathroom into one of my first-aid kits, where it stays full-time. The weight penalty is negligible and well worth it if it means I can keep my toenails from hammering into the front of my ski boots or slicing open my toes.

I was pleasantly surprised to learn that even the most elite athletes hold the humble nail clipper in high regard. Take Steve House. The professional guide and alpinist stresses that while overgrown fingernails hurt, they’ll also impede your ability to grip rock holds. But don’t go overboard; you’ll regret cutting them very short. “If you clip your nails too short, it can expose more skin on your fingertips, leaving it more vulnerable to splitting, especially on the corners,” he says. “I see this especially in Alaska, where people know they’re not going to shower for three weeks and they do the mega cleanse, thinking, I’m going to cut my toenails and fingernails short so I don’t have to take this pair of clippers up Denali’s West Buttress. But it’s a classic beginner mistake, because you get into a cold, dry environment and your hands are constantly getting wet then drying, leading to horrendous, excruciating splits.”

House also saves a spot for nail clippers in his repair kit. “When you are fumbling with cold hands and trying to fix or sew something up, nail clippers are a little easier to handle than scissors or a pocket knife,” he says. “It’s one of those tools that has more applications than it was designed for.”

Fly fishermen, like Outside’s articles editor Jonah Ogles, swear by them as well. “Nail clippers are one of the most handy things I carry on the river,” Ogles says. “Tying a fly and need to snip excess line? I use a nail clipper. Hitting minute five of trying to undo that nasty wind knot? Reach for the clippers and just start over again.” On top of saving you time, they can also prevent a trip to the dentist. “Sure, you can use forceps or your teeth to untie knots, but clippers are going to save your enamel and are far easier to handle.”

As Outside’s Gear Guy, I get to test out some of the coolest cutting-edge outdoor equipment. But I’m increasingly finding that it’s the small, no-frills gear that can make the most difference for your money, in no small part because it’s often overlooked. I’ll never pass on nail clippers again. Yes, you can hack away at your nails with a knife, but it’s a pretty great way to cut a toe. And after all, you have to take care of your feet.

When you buy something using the retail links in our stories, we may earn a small commission. Outside does not accept money for editorial gear reviews. Read more about our policy.

How to fix nail clippers

Nails break, split and tear all the time. We get that. But the most heartbreaking part is having uneven lengths on your gorgeous new manicure. Luckily, we have more than a few tricks up our sleeve for temporarily repairing your nail without trimming it down. Here’s are five ways to fix a broken nail.

1. How to Fix a Broken Nail Using a Tea Bag

Step 1: Cut the top off the tea bag and empty its contents. Then cut a small rectangular section out of the paper to fit the exact width and length of your nail tear. (Some people cover the whole nail, but we prefer smaller patches.)

Step 2: Apply base coat over the entire nail. While it’s still wet, place the patch over the tear and lightly press down to secure it in place. Seal it in with one more layer of base coat (the tea bag should look transparent now). Allow it to dry completely before taking your file and gently removing any excess paper so that it’s flush with the nail.

Step 3: Paint two coats of color polish over the patch job and finish up with a swipe of topcoat.

2. How to Fix a Broken Nail Using Glue

What you need: Strong nail glue, a nail file, base coat, color polish and topcoat.

Step 1: Lightly (seriously, lightly) buff the surface of your nail to remove any excess dirt or oils.

Step 2: If your nails are long enough, apply a small amount of glue to the back of the nail before dabbing some onto the front as well. If not, just apply to the front and gently press the broken section to firmly connect it with the rest of your nail.

Step 3: Once the glue has dried completely, take that file again and smooth out any lumps or bumps on the top of your nail.

Step 4: Apply a base coat over the entire nail, followed by color, then topcoat and you’ll be good to go.

3. How to Fix a Broken Nail Using Dip Powder

Step 1: Follow steps one through three above using your nail glue and file.

Step 2: Apply base coat over the nail. While the base is still wet, dip your entire nail into the powder. Brush off any excess and let it dry completely.

Step 3: Repeat this process two or three more times.

Step 4: Apply a seal protectant to finish the dip powder process. Once this has dried completely, use the buffing block to gently smooth out the surface of your nail and remove any stickiness.

Step 5: Finish with base coat, color and topcoat.

4. How to Fix a Broken Nail Using Press-On Nails

Step 1: Arrange and organize your press-on nails so they are sized and in the order in which you will apply them (this is most relevant if you’re using them for all 10 nails rather than just the one broken nail).

Step 2: Very gently buff your nail to smooth the surface. Then wipe each with rubbing alcohol on a cotton ball to remove excess dirt and oil.

Step 3: Peel the sticker off the back of the false nail and press it down onto your real nail, making sure it sits as close to your nail bed as possible. Hold it down for 20 seconds before applying the next press-on. (Pro tip: Always apply your thumb nails last.)

Step 4: Wait until the press-on nails have completely set (this may be a few hours or even overnight) to file or trim them.

5. How to Fix a Broken Nail By Filing or Trimming It (Because Sometimes You Just Have To)

Step 1: Clip all of your nails using straight-edge clippers (better for getting into those side corners) so that they are at a fairly even length. (Psst, always follow the 90-10 rule when trimming your nails, which means cutting 90 percent of the excess nail and then filing the extra 10 percent.)

Step 2: File in one direction at a time (not back and forth which can potentially cause more damage) until your nails are smooth and even.

The world’s first ergonomically correct nail clipper. That’s right. All this time you’ve been doing it back-to-front. Our award-winning breakthrough in design gives you increased control and leverage as you trim your nails. Precision engineered from surgical grade stainless steel and with a handmade leather case, you’ll want to show off your Klhip Ultimate Clipper almost as much as your tidy new nails. A great gift – even if it’s to yourself.

How to fix nail clippers

Ultimate Clipper Features

  • Improved ergonomics: The forward facing lever applies pressure directly over the nail, giving you better control and a more comfortable grip.
  • Clean cut: Precision-engineered blades cut smoothly and accurately so there’s no need for filing and clippings stay on board.
  • Great action: Increased leverage makes for a superior cutting action and effortless clipping. You’ll be willing your nails to grow faster.
  • Built to last: Durable surgical stainless steel (440C) and world-class manufacturing produce the world’s best and highest quality nail clipper. Klhip Guarantee.

FREE Shipping
We offer FREE domestic shipping (USPS First–Class) on all orders over $50. You may also upgrade to USPS Priority Mail for $7 or FedEx 2–Day for $20. For all methods of shipping and international availability please click here: More >

Guarantee:
We designed and built The Ultimate Clipper to the highest quality standards. More >

United States
US Utility (issued) 9204703
US Design 1 – D629161
US Design 2 – D639509
US Design 3 – D639510

Foreign
EU Utility – 2 340 738
EU Design 1 – 001725334–001
EU Design 2 – 001725334–002
EU Design 3 – 001725334–003
Japan Utility – 5859199
Japan Design – 1410837

One Badass Nail Clipper
Klhip’s technology produces a more effective, more ergonomic and much, much better–looking clipper. They have it right: “Conventional nail clippers are backwards; they’re controlled from the wrong end.” That leads to less than ideal control and cutting power. GQ
View Testimonials >

How to fix nail clippers

The Japonesque® Fingernail Clipper trims nails with salon-like results. The sharp curved blades contour to the shape of the nail tip & cut nails with precision. Designed with a durable pivot handle the clipper evenly distributes pressure to achieve a clean, even cut every time. Constructed with high-quality stainless steel this go-to beauty tool offers long lasting performance.

  • Sharp blades trim nails with precision
  • Curved blades contour to the nail tip
  • Durable pivot handle evenly distributes pressure for a clean, precise cut
  • Constructed with high-quality stainless steel for lasting performance
Buy it now on:
Share:
  • Description
  • Suggested Use
  • Reviews

The Japonesque® Fingernail Clipper trims nails with salon-like results. The sharp curved blades contour to the shape of the nail tip & cut nails with precision. Designed with a durable pivot handle the clipper evenly distributes pressure to achieve a clean, even cut every time. Constructed with high-quality stainless steel this go-to beauty tool offers long lasting performance.

  • Sharp blades trim nails with precision
  • Curved blades contour to the nail tip
  • Durable pivot handle evenly distributes pressure for a clean, precise cut
  • Constructed with high-quality stainless steel for lasting performance

Cut nails at an angle. Trim one side & then the other to avoid putting pressure on center of nail.

CARE: Use cotton pad with alcohol to clean after use. Store in a cool, dry place.

WARNING: Blades are sharp. Handle with care. Keep out of reach of children.

Prevent toenail fungus from occurring and re-occurring via your toenail clippers, with our guide on How to Keep Toenail Clippers Clean.

We’ve got the cure.

What kills toenail fungus on nail clippers? Many people ask about this from time to time, whether or not they have yet discovered toenail fungus on their own nails. Toenail fungal infection is very common and it’s a good idea to keep an eye out for its appearance. Take quick action after you’ve discovered or suspect a fungal nail. See your healthcare provider or podiatrist for treatment of stubborn conditions, including paying attention to an ingrown toenail. But how can we prevent this in the first place from happening?
How to fix nail clippers

Keeping Your Toenail Clippers Clean

Help guard against recurring onychomycosis by keeping toenail clippers scrupulously clean. Thoroughly sterilize all pedicure tools after you use them in order to maintain a good line of defense against fungal infection and potential re-infection.

How to clean pedicure tools to prevent infection and re-infection

  1. Fill a bowl with enough isopropyl alcohol (rubbing alcohol) to completely cover your stainless steel nail clippers, tweezers, and nail nippers after your pedicure. Soak for 30 minutes and air dry.
  2. Fill a small bowl with warm water and dish soap or antibacterial soap, then thoroughly scrub clippers and tools with a toothbrush. Soak a paper towel with a rubbing alcohol, wipe down the washed tools, then dry them with a fresh paper towel.
  3. Put nail clippers into a small bowl of boiling hot water, scrub with a toothbrush, wipe with rubbing alcohol and dry with a clean towel.
  4. Bleach is a very good disinfectant: Soak nail clippers and tools in undiluted bleach and wipe them dry with a paper towel. And keep your pets away!
  5. Barbicide, that blue liquid used in barber shops to sterilize combs and scissors, is a good choice to clean nail clippers too, while 45 minutes under a UV light will also kill all infectious microbes, fungi, and bacteria.

Take care of your feet

We know that regular foot care is an important part of maintaining overall good health, and it’s also important to the foot health of everyone around you, whether at home, in locker rooms, gyms, and at public pools. Sanitizing and disinfecting nail clippers and all pedicure tools is very important. And don’t forget to keep your socks and shoes clean and dry. Fungal infections love damp socks and the company of their kind in an infected shoe!

Avoiding Onychomycosis and Athlete’s Foot (along with Athlete’s Nail) is always easier than eliminating these conditions, and maintaining healthy nails and feet demands good foot hygiene. (Alas, nail polish will only disguise the problem and postpone the need for action.)

Regular use of Doctors Kline + Green’s Clear+Restore is also recommended in order to prevent toenail fungus, as well as treat dry cracked toenails and other symptoms.

We’ve got the cure.

How to fix nail clippers

Drs Kline & Green – Clear + Restore Nail Treatment – 3 Month Supply – Made in USA

If your fungal nail infection doesn’t respond to this, be sure to see your health care provider or podiatrist to diagnose the problem and prescribe the most effective treatment. And make sure to keep your nail clippers clean and sterile to avoid re-infection after the fungal infection is defeated.